PCI 7442-7443-7444 High-Density 128-CH Isolated Digital I/O PCI Cards

Product Attachments

PCI 7442-7443-7444 Data Sheet    Size: (314.57 KB)

Description

ADLINK's responding to the industry's need for high-density digital input/output modules, the ADLINK PCI-7442/7443/7444 DIO card series delivers up to 128 opto-isolated channels for a wide range of demanding PCI-based applications. The PCI-7442/7443/7444 series comes with 64 (PCI-7442) or 128 (PCI-7443) opto-isolated digital inputs and 64 (PCI-7442) or 128 (PCI-7444) opto-isolated digital outputs. With a 1250 VRMS (excluding cables) channel-to-system isolation protection, these cards are shielded from damage caused by accidental contact with external voltage while promoting simple ground connections. All input channels are identical non-polarity with each line isolated and suited to collect digital inputs even at high-noise environments. Featuring a Change-of-State (COS) interrupt function, the PCI-7442/PCI-7443 instantly generates an interrupt request to the PCI controller when it detects a sharp change in the logical state of any of its digital inputs.

• Supports universal 32-bit 3.3 V and 5 V PCI
• 64-CH opto-isolated digital input and 64-CH opto-isolated digital output (PCI-7442)
• 128-CH opto-isolated digital input(PCI-7443)
• 128-CH opto-isolated digital output (PCI-7444)
• 1250 VRMS isolation voltage
• Programmable Change-of-State (COS) detection for all digital input channels
• Voltage protection of up to 28 V for isolated input
• Up to 300 mA high-output driving capability for all output

Accessory

DIN-68S-01 Termination Board with a 68-pin SCSI-II Connector and DIN-Rail Mounting (without cable), 4 units are needed for 7442/7443/7444

Associated Software

DAQBench V2.44 Run Time DAQBench 2.44 Run-Time License
DAQBench V2.44 V2.44,ActiveX Controls for Measurement and SCADA/HMI
PCI-OCX V4.22 V4.22,ActiveX Controls for ADLINK PCI/PCI Express(R)/cPCI Series Data Acquisition Cards
DAQ-LVIEW PnP V1.30 V1.30,LabVIEW™ Interface for all ADLINK PCI/PCI Express(R)/cPCI Series Data Acquisition Cards
PCIS-VEE V3.21 V3.21,VEE T Interface for ADLINK PCI/cPCI Series Data Acquisition Cards
DAQ-MTLB V1.3 V1.3,MATLAB Data Acquisition Toolbox Adapter for ADLINK DAQ Cards
AD-Logger V1.11 Configuration-based Data Logger for ADLINK DAQ cards (30 Days Trial Version 1.11) (Build 1.11)